 World Wide F-Body Hideout |
|
|
|
Statistics
|
| Users |
8,275 |
| Active Ads |
129 |
| Comments |
51 |
| Views |
485,903 |
| Items Sold |
15 |
| Value of items sold |
$39,120 |
|
| « |
January 2009 |
|
| Sun | Mon |
Tue | Wed |
Thu | Fri |
Sat | | | | | | 1 | 2 | 3 | | 4 | 5 | 6 | 7 | 8 | 9 | 10 | | 11 | 12 | 13 | 14 | 15 | 16 | 17 | | 18 | 19 | 20 | 21 | 22 | 23 | 24 | | 25 | 26 | 27 | 28 | 29 | 30 | 31 |
|
Random Ads - Miscellaneous Items For Sale
|
11 second motor.
I OWNED U
|
motor and trans from a 95 z28
02camarojd
|
FS: Sleeper Sofa, Love Seat, and Entertainment Center
nytmare
|
FREE! LS1 WS6 pair front springs FREE!
Vahomboy
|
17x9-17x11 Torque Thrust II's
Wreck
|
L98 TPI 383 Short block
00WS9
|
|
· more ·
|
|
|
|
|
|
|
|
|
|
Views
|
Date Posted
|
|
1944
|
Mon April 14, 2008
|
|
|
|
|
Asking Price
|
Condition
|
|
$4,000.00
|
Excellent
|
|
|
|
|
|
Description:
|
Bottom End
355 4-bolt ARP studded mains, roller block
Bored out and honed w/ tq plate
Polished forged crank from ZZ4 crate motor turned polished and chamfered oil holes
5.7 forged Eagle H-beam rods
JE nitrous pistons forged aluminum 550g ea.
Block decked and pistons left 0.010 in the hole
Total seal rings 0.032 1st ring, 0.018 2nd ring
Felpro 1003 head gasket (4.166 bore and 0.041 comp. thickness)
Static Compression is 10.18:1
Dynamic compression is 7.58:1
Heads
Aluminum Protopline 200cc intake runner and 64cc chamber
2.02/1.60 valves 0.100 longer than stock
Valve springs comp cams 26987 121/388# @ 1.800 install height
1.150 coil bind 344# / in.
7/16 screw in studs, guide plates
ARP head bolts
From Protopline’s website @ 28” of water
Intake exhaust
.200 – 146.41 101
.300 – 203.72 156.94
.400 – 249.84 176.85
.500 – 260.51 186.34
.600 – 268.51 190.16
.700 – 276.41 194.87
Valve train
CC Pro magnum hardened pushrods
1.6 ratio CC Pro magnum rockers
New extreme energy roller lifters (hydraulic)
CCA-07-306-8 Grind LT1 290HR-12
Adv. 290/307 and 230/244 @ 0.050
.544/.576 w/ 1.6 rockers
112 LSA
http://www.compcams.com/Technical/Se...umber=07-306-8
Intake
Holley Stealth ram
BBK 58mm TB
Heads and intake port matched.
Fuel
30# Accel injectors
Adjustable fuel pressure regulator
Currently the motor has a direct port N2O setup plumbed under the manifold. I have a separate fuel system dedicated to the n2o. Please let me know if you'd be interested. As for right now, I will not part it out.
$4000 obo.
Cars gone 11.69 in the gear jammer. Auto with a N/A tune would go low 11's and potentially high 9's on juice. The motor was built with the intention on spraying a 300 shot.
Please contact via PM for phone number or pictures. Thanks.
|
|
Keywords:
|
motor nitrous race 355
|
|
|
|
For Sale By
|
 |
Moderator
|
|
Posts: 2,865
Registered: April 2003
Location: In front of you!!!
|
|
|
|
|
|
All times are GMT -7. The time now is 06:18 PM.
