World Wide F-Body Hideout

Is it possible to switch Trans Am and Forumla Panels

Xer0ta — Fri, 03 Sep 2010 16:30:47 GMT

As in, put trans am rear bumper and hatch on my 94 formula? I love the way the bumper looks with the CETA panel and the raised spoiler as opposend to the lowered spoiler on my formula.

Would they bolt right up?

in car video

subhumanzz — Fri, 03 Sep 2010 16:04:59 GMT

i bought a GoPro hd motorsports cam. this is the first video. i also have one that was taken from outside the car but its kind of a lengthy process because it shoots in mp4 and you have to convert it back and forth between editing and uploading. i will have it up sometime today. watch in 1080.

http://www.youtube.com/watch_popup?v...7BHk&vq=medium

Couple of races and a new house

Tinkerinmatt — Fri, 03 Sep 2010 13:21:02 GMT

Was on my way to sign the papers on my new house and decided to take the Camaro on that joyous day to make it even better. I was on the outer loop of 495 about a mile before the Woodrow Wilson bridge and I see a new blue challenger in my mirror weaving in and out of traffic trying to catch up to me. I was in the left lane and slowed down to around 55 as he caught up to me as we just hit the bridge. He hit his brakes to be even with me, and I couldnt see his face because his tints were so dark. He then gunned it and cut in front of me as I dropped it into second and took off after him. I stayed GLUED to his rear bumper almost having to feather the throttle very slightly so I wouldnt hit him as we went across the bridge. 2nd gear...3rd...4th...hes not letting off. Hes still running as I hit 5th gear and really have to start feathering the throttle. I watched my speedo cross the 140mph mark and decided to quit before we hit the other side of the bridge and I had to exit but he kept on it for another while, probably got his car to around 150. It must have been an SRT8 because I murder 5.7s at the 1/8th all the time.

Then on 210 I saw a brand new mustang, the ones with the sequential taillights, light blue also. It wasnt a 5.0, but couldnt tell if it was a GT or the new V6 but it had dual exhaust. I tried to bait him a little but he didnt respond. Got to a light and I was in the left lane and wasnt really paying attention, he was in the right lane and there was a minivan between us so I didnt realize he was there. Light goes green and I casually launch and see him launch hard with tires squeeling and take off while looking over at me. I punch it and reeled him in and passed him by the time I got to around 90 mph.

Finally made it to the place, signed my papers on my new house, did a huge ass burnout out of the parkinglot and drove the camaro right to its new home finally in a garage!

Fawk Traffic

Radd — Fri, 03 Sep 2010 08:14:40 GMT

Sometimes you have to just say fawk traffic!

YouTube- Fawk Traffic Burn Rubber!!

1977 window motor

ULLRICH — Thu, 02 Sep 2010 16:07:13 GMT

I have to replace my power window motor in my 1977 Formula Firebird.
I understand that you have to drill 3 holes in the door panel to get to the motor bolts.
There is a paper template that aligns with the two door rivits to locate these holes.
I cannot find this template anywhere.

Any ideas?
Thanks

KITT. ride for sale....

Raven02TA — Thu, 02 Sep 2010 11:13:00 GMT

lol. this stuff you find on craigslist. for those that dont recognize. that USED to be a knight rider ride.

http://norfolk.craigslist.org/tag/1863895091.html

Weekend Racing.

Radd — Thu, 02 Sep 2010 08:15:14 GMT

YouTube- Camaro Z28 SR20, TT 350z Cobra , WRX...

Fun Burn out!

Radd — Thu, 02 Sep 2010 08:14:11 GMT

YouTube- Cammed LT1 Camaro Z28 Doing some donuts....

97 lt1 Cam/Heads vs 09 Mustang gt Cam/Heads

Radd — Thu, 02 Sep 2010 08:12:14 GMT

YouTube- 1997 Camaro Z28 Vs 2009 Mustang GT - HD

18 inch wheel clearance issues

Xer0ta — Thu, 02 Sep 2010 03:18:22 GMT

Is there any? I've read that sometimes the rears will rub in the back. I can't decide to go with an 17x9 or 18x9 rim though I'd prefer the 18's if they bolt right up and won't cause me any headaches.

Also, preferred tire sizes? I know its 275/40/17 - 285/40/17 for the 17x9 wheels, how about the 18s?

Any personal experiences with 18 inch wheels?

228 Wendy's/Giant parking lot in MD

1SlowTa — Wed, 01 Sep 2010 01:32:28 GMT

Anyone want to meet up out there this Thursday night? I should be out there since I have Friday off. There is usually a pretty good amount of muscle cars out there.

Does anything ever get planned or happen in georiga / florida?Jus

Xer0ta — Tue, 31 Aug 2010 18:29:59 GMT

Just wondering. would be cool to have a southeastern meet and such.

Selling a couple things to the local guys... LS6 & LTs

Weeble1 — Tue, 31 Aug 2010 16:41:04 GMT

Work is slowing and money is tight. All items are located in Spotsy. I can send pics on request.

LS6 intake including rails & injectors-$350
LPP stainless longtubes & Y, catless-$450

If you can come up with $8500 you can take the damn car.

Let me know.

Josh

Colorado people

LS1Addict — Tue, 31 Aug 2010 03:38:04 GMT

What's up anyone still around?

Anyone got any LT1 LTs laying around??

IROCZ86 — Mon, 30 Aug 2010 20:22:16 GMT

Mine are starting to get pin holes in the bottom just before the collector. I got the larger one JBed up for now but I dont think it will last through next summer, there pretty rusty. Or if you have a better alternative to what I have now I,m all ears as long as it doesnt kill my back pocket. :sad2: